Mr. Jones DOP, OPB (updated)

#1

Counting Crows

Notes:

  • Starts on the 4th hit of the HH count-in
  • Updated using new source file; included MIDI working file for drums and bass regions

Suggested kit(s):

  • v1 & v2 NP StdPBass 63-91

Includes: 2 songs, MIDI source file, MIDI working file and Chords & Lyrics

Mr. Jones (Counting Crows).zip (162.1 KB)

176/1063

2 Likes
Mr. Jones
#2

I’m into this build of the song, BUT (there’s that big but) in the chorus, the first chord is supposed to be a C, not an Am. Chorus goes C, F, G. If you could trade those Am out for a C in the choruses it would be a very playable song…especially outside for the summer. Thanks!

#3

Thanks for the feedback. I’ll take a look at it.

1 Like
#4

I’ve listened to the song on the BB and played along with it using the cheat sheet and the chorus starts with a C—which is what I thought I provided however, it may be my timing.

I also checked out a Youtube version and I hear it the same as the BB version.

I’ve got a MIDI source file for what seems to be a different version and I’ll work that up this weekend and try it out to see how it compares and sounds.

1 Like
#5

Awesome, can’t wait. Thanks!

#6

Replaced original post with updated version

1 Like
#7

Man…that is so good. You out done yourself. Went over it today. Going to drop it in a set tonight. Thanks!

1 Like
#8

Hi there,

First off thanks for making this file! I’m having a strange issue with it though when the first part kicks in the volume drops totally off and is barely audible? the count in works fine but then its very faint.

Any suggestions what might be causing this? could I possibly get a different version of the drumset somewhere?

Thanks,
N

#9

Is this happening in the BBM, pedal or both? Is it happening in both the v1 and v2 versions?

I’ll try to check it out later today however in the meantime, you can try it with the NP Standard Pro kit if you have it. If it sounds okay, then you might want to delete the NP Std Pbass 63-91 kit, download, import and activate the kit.

#10

It works fine in the BBM, but is barely audible from the pedal itself after the intro count. I am using BBM 1.6.5.0 and my pedal is at version 3.2.0.

It happens with both versions.I have the NP StdPBass 63-91 drumset installed but not the other one, I got it from this link NP StdPBass 63-91

Thanks,
N

#11

3 things to try:

  1. Try listening to the pedal using headphones from the 1/8” output on the left side of the pedal. If it sounds properly,
  2. Use both left and right outputs from the pedal
  3. If this still doesn’t sound right, try downloading and reinstalling the firmware.

I’m going to guess that you are using the left output from the pedal.

#12

OK tried 1 and it was the same result, I have both outputs used and plugged into a Zoom R16, then some powered speakers so should be getting the stereo through ok.

Firmware wise everything else is working but I can try and reinstall it to see.

One other thing just do I have to have the STANDARD PRO- DRUMS & PERCUSSION drumset downloaded for the NP StdPBass 63-91 to work?

Thanks,
N

#13

You could try 62-91 kit from here Substitute Standard Pro with Bass kits

#14

Doh! I worked out what was happening, the main song was in the intro section when I imported it to the BBM, once I moved it into the main section I could hear everything fine.

The intro must only allow for 2 bars or something?

Thanks again great file :slight_smile:

#15

When the song is in the Intro section, the BBM will play the full song one time. There are no settings you can change in the BBM. Moving the song to the Main Drums Loop section will also play the entire song but it will loop until you double tap to end.