sending one at february 19
I resend it today
please post the vid
Hey you sent me the beta on SD card I had trouble loading beta version, how would I load the release 5.0.0? Are they the same, Aeros says all up to date. I set everything up like NYHC, I seen his video and seen the problem he had with the 5.0.0. I’ll wait till it gets figured out. I tried to update over WiFi but it’s still in beta version won’t update when it does get figured out.
The bug you reported in this vid you sent is not reproducible please work with Support so we can further pinpoint what may be causing this issue on your end.
I just tried with my Aeros as master and the BeatBuddy following and there was no issue when switching parts in 6x6 while auto song part change is enabled.
Thank you for your patience
This version will require using an SD card as well, please try using the link above at the top of this post, if that does not work I will DM you the file directly or you can ask support to email it to you. If that still does not work, you can reach out to support@singularsound.com where we likely have a more lengthy process that may fix the issue and stop it from happening in the future as well.
Otherwise, you will need to wait until it is on wifi, which will be soon!
Thanks for the question
As of right now there are no verified bugs reported on the beta
Hi Brennan
Can you do like I can on the video (with the beta version)
Press at any time on the loop (just after the red bar) , and the transition gonna run at the last measure
and switching the to next part ?
Yes, I did exactly as you did in the video except the BeatBuddy should not be started before the Aeros if the Aeros is master, this is a limitation of Aeros as master, so there’s a red flag there, I think there is potential you are misusing the products.
Another reason I believe this is because no other user has reported this, if it were a bug that was so simple to reproduce, others would say something.
There is either misuse or another unmentioned key detail that is causing this on your end.
To be totally sure, I need you to please continue messaging support and we will continue this investigation through them
Do you think this has anything to do with you (and me) completing the “loop” and connecting the BB MIDI Out to the Aeros MIDI In? I know Brennan said that connection isn’t needed, although I need it for when I switch which unit is master. Just trying to help.
do you have the same issue with the 5.0.0 ?
I gonna investigate more tomorrow if I can .
I’m a bit sick (health) at this moment
Why would you do that? Just curious. My BB midi out goes to my other pedals that pick up the bpm tempo from the Aeros. Handy when you want an effect that syncs with tempo (like delay).
1 Like
I haven’t updated it yet, mainly because of the problem you were having, but also because I’ve been too busy.
Even with the Aeros set as MIDI Master, there are times when I just want to use the BB as a fancy metronome, and it seemed that with the hands-free switching the Aeros from TR + Out to Rcv + Off, that the BB would still need to be routed (out) to the Aeros (in) to maintain the timing/tempo when the BB is the “master.” At least in my limited MIDI knowledge, I assumed for the BB to send the clock to the Aeros when I have the Aeros set to Rcv + Off, that the BB MIDI Out would need to go to the Aeros MIDI In. 
I update to 5.0.0 and it’s ok for now
maybe I’m wrong and maybe Brennan can correct me
But I think you can try to Beatbuddy out back to Maestro In (Maestro work as midi merge)
So you have
Maestro out to Aeros in
Aeros out to Beatbuddy in
Beatbuddy out to Maestro In
Aeros set to Merge
I’m not sure of this is the good way to switch on the fly between the tr+out and the Rcv+off
Hi Brennan
Normaly you can reproduce this
Set the cable like it must be and with the 5.0.0 firmware
Maestro out to Aeros In
Aeros out to Beatbuddy In
Nothing plugged on the Beatbuddy out.
Set the BB midi in channel like you want omni, or 1 doens’t matter
Set the Aeros as Master , channel 1
Set it to Midi OUT
Go to the default mode of the Beatbuddy, and you will see that nothing works
Now set the Aeros as midi merge
Now you will see that the BB default mode works
Now go to the Aeros default mode of the Maestro
make a 6x6 song
Play just 2 parts
Go to the default mode for Aeros to the play parts for changing parts
switch between the part 1 & 2
This start a recording everytime or not ?
Aeros midi out or midi merge start a recording when you change the parts with the default mode of the Aeros on the Maestro.
Best regards.
New Version 5.0.1 has been loaded into the download link in the original post 
Changelog is at the end of the original post above.
1 Like
Thank you for clarifying, this is now reproducible
This is not fixed in 5.0.1 but we will look into it shortly
3 Likes
Great that this error has been reproduced. Hope to see this corrected real soon.
The error we reproduced was:
- if Aeros has Auto Song Part Change (6x6) enabled
- If using the MIDI Maestro to change parts using CC:113 value 1-6 followed by value 0
The Aeros would start a transition on the next empty track in the song part you were transitioning to.
If Auto song part change is disabled, there is no reproducible issue when switching parts
We highly encourage users to try this version! This bug is only a corner case and should not affect most use cases 
We will have a new build with this fixed soon
Thanks for reporting!
2 Likes
Brennan, if you guys could make a way to where the beat buddy can transition the song part automatically on the Aeros in 6x6 mode, this would be the best upgrade. I like the count ins or intro fills and with the Aeros as the master, that totally gets eliminated.
Aeros firmware version 5.0.2 has been loaded in the download link in the original post
Changelog has been added to the bottom of the original post.
3 Likes
