In Aeros Loop, how can I set my switch play to be the first in order and not the third as it is by default?
Is mapping possible in Aeros?
I can’t adjust.
My second problem is that when I go to part 2 with MM, it automatically happens that Aros starts recording track two.
When I start part two via the BB footswitch, it works normally, not start recording the second track.
How do I solve this problem?
Custom mode on Aeros?
How i’m sorry I was confused, I though you was speaking about the Maestro, My bad
I gonna delete my post because they are wrong
But What do you man with the switches , cna you expand
The play button is third to me, and since I’m sitting on a chair, it’s awkward for me to press the switch with my left foot.
My second problem is that when I go to part 2 with MM, it automatically happens that Aros starts recording track two.
When I start part two via the BB footswitch, it works normally, not start recording the second track.
How do I solve this problem?
To avoid the track recording
go to Aeros Settings >Behavior> Scroll down until you see" Next track record" and set it OFF
In the settings it is set to off.
CC:102 is also disabled in BB settings in MIDI Out.
What kind of command do you use on the MM ?
Next part or a specific Part number (I mean Part 1, Part 2 ect…)
take a look at the setting “next track record is OFF” and “Next PART record is OFF too”
Specific Part number ( Part 1, Part 2)
I’ll see when I gets home from work for the next part settings.
Thank you very much for your help, I hope this solves the problem.
Both settings are off.
Part 1 and Part 2 via MM App I copied from BB mode.
This solved my problem.
Settings MIDI IN Filter Custom and set ON CC 113 transition.
yeah , but this not the best (but if you are happy with this , is good)
Just check if the Command on the MM is CC 113 value 101 (part 1) and CC 113 value 102 (Part 2)
transition on BB (102) must be ON
And check on the Aeros if the transition is On , I guess in behavior too
You say that it is not the best solution set up like this, what are the downsides?
Unfortunately, this did not solve my problem because now BB and Aeros are not synchronized. I went back to the old settings.