BB2 does not see my 2 port footswitch from my original BB

I have tried both ports, the right footswitch seems to work ok, nothing from the left. I go through Detector and neither switch registers. I plug it back into my original BB and it works fine.

Make sure you’ve updated the BB2 firmware.

  1. Double-check that the BB2 is properly configured.

From ChatGPT:

  1. You should configure the BB2 to recognize the Footswitch+ as a two-button controller. You do not need to use the SuperSwitch settings.
    Exact setup steps

  2. Connect the Footswitch+ to Multiswitch 1 on the BB2. Make sure you are using a TRS patch cable and consider trying a different one

  3. Press the Drum Set + Tempo knobs simultaneously.

  4. Find Multiswitch 1.

  5. Confirm Port 1: Footswitch+.

  6. Move right to the gear icon and press TAP.

  7. Select Detector.

  8. Follow the prompts:

    • Press the left Footswitch+ button.
    • Press the right Footswitch+ button.
  9. Confirm the result is Momentary Norm. Off.

  10. If this still does not work, reach out to support@singularsound.com

  11. Let us know what you did to get it working.