hello. How can I keep the same preset when changing loops? Meaning I want to create a loop, then use a different sound from my amp on another loop. Right now when I switch everything changes to the new preset. Thanks!!
This is when you need your effects loop.
Could you elaborate? I’m not sure what you mean. Thanks!!
It sounds like your looper output is feeding into your amp. So your cleanly recorded loops (pre-amp)will always sound like the amp settings you have at any given time. The effects loop allows you to record any loop with whatever effect is set in the effects loop. After the loop is recorded, you can change the effect in the effects loop and the new loop will be recorded with the new effects.
but what do you mean by effects loop? How do I get one or incorporate this with my set up. I have a Spark II. I was hoping at least after spending all this money on the entire aeros loop studio I could have this function to where I could keep presets.
So how do i do that specifically? Thank you.
Hey! Just so you know, the Spark II amp doesn’t have an effects loop — it’s a fully integrated amp with no way to insert external pedals between the preamp and power amp stages.
I checked with GPT about this, and it confirms the Spark II can’t separate your clean guitar signal from the looped output of the Aeros or BeatBuddy. That’s probably why you’re hearing the same processed sound everywhere — everything is going through the same input/output path.
If you’re curious about how effects loops work or want to explore ways to separate signals for looping, it’s worth asking GPT or looking into small mixers or ABY setups.
Cool thanks, good to know!! Could I accomplish it with this:
fender-blues-junior-iv-15-watt-1x12-inch-tube-combo-amp-lacquered-tweed?
Hey! The Fender Blues Junior IV doesn’t come with an effects loop either — at least not in its stock form. It’s a classic all-tube amp with a single input and no send/return jacks, so all your effects go straight into the front.
I double-checked with GPT about this, and yeah, that’s likely why you’re running into the same issue with the BeatBuddy and Aeros — everything goes through the same signal path with no separation.
Some people do install mods to add an effects loop to the Blues Junior, but it’s not built-in. If you want to explore how to split your signal properly for looping, GPT suggests using a small mixer or A/B/Y pedal as a workaround.
It’s just so frustrating. i’ve spent 1400.00 on all this stuff, and still can’t do what I want!! Can you recommend an amp that does this or has fx loop? If I wan’t to play something clean, then lay a distorted track on top of that, how do I do that?? If fx loop is the answer please can you recommend a good amp? I’ve had a rough go with this company and communication etc. Thanks.
Hi [tagnew],
I understand your frustration—investing in gear and not achieving the desired setup can be disheartening. Let’s work through this together.
Understanding the Challenge:
The core issue is that your current amp, the Spark II, lacks an FX loop. This means all your signals, including those from the Aeros looper and BeatBuddy, are processed together, making it difficult to isolate effects or maintain consistent tones across loops.
Recommended Solution:
To achieve the flexibility you’re seeking—such as layering a clean rhythm with a distorted lead—you’ll benefit from an amp equipped with an FX loop. This allows you to insert effects (like the Aeros) between the preamp and power amp stages, giving you greater control over your sound.
Amp Recommendations with FX Loops:
Here are some budget-friendly amps that include FX loops:
- Boss Katana 50 or 100 MKII – Versatile and affordable.
- Peavey Bandit 112 – Reliable solid-state amp with good tone.
- Bugera V22 or V55 – Tube amps offering great value.
- Fender Mustang GTX – Modern features with an FX loop.
Optimized Signal Chain:
Once you have an amp with an FX loop, consider the following setup:
- Guitar → Pre-effects (e.g., Arena) → Amp Input
- FX Loop Send → Aeros Looper → FX Loop Return
- BeatBuddy → Separate Mixer Input or Amp’s Aux In
This configuration ensures:
- The Aeros captures your guitar loops with the desired effects.
- The BeatBuddy’s drum patterns remain unaffected by amp effects, maintaining clarity.
- You have independent control over each component’s volume and tone.
Additional Tips:
- If you’re using a mixer, routing the BeatBuddy directly into it can provide even more control.
- Ensure your amp’s FX loop is compatible with line-level signals for optimal performance.
this is awesome thank you so much!!