Hi folks,
I’ve just tried to set my pedal to accept tap tempo from external button 1. It works sometimes, but sometimes things get goofed up and pedal 2 seems to do the same thing, then, some how, the issue is fixed and I can use button 2 for pause/unpause.
I don’t know what the issue is.
Any thoughts.
That sounds like a possible cable issue - check (or try replacing) the one that goes from BeatBuddy to your footswitch.
DId you ever figure out what the issue was here? I am having the same problem. If I use the tap tempo (assigned left) FIRST and then try to use pause/unpause (assigned right) the right also becomes a tap tempo.
If I use the pause (right) first it works, until I use (left) again. then both become tap tempo buttons.
Any thoughts?
You can try downloading and reinstalling f/w; make sure you’re using the TRS patch cable for the remote foot switch and use the firmware to detect and configure to the type of foot switch buttons.
Best to contact support@singularsound.com as that post was 7 years ago and several firmware iterations since. Tell Support which f/w version you are using.