It booted up fine the first time.
I then wanted to rewire my board and pulled the power, now it won’t start anymore.
I’m powering it via a strymon zuma, it delivers up to 500mA.
Video: Dropbox - video_2022-01-14_13-28-22.mp4 - Simplify your life
if you can’t hear the clicking, on the left in the compressor you can see the leds periodically lighting up.
Try powering it with the AEROS PSU. If it works, it’s the Zuma. If it doesn’t, contact Support, support@singularsound.com.
Please let us know what it turns out to be.
It’s the zuma…
all other pedals work though. I’m writing a mail to the strymon support
Strymon’s reply will most likely be similar to what they said in post 4/7 at this link: PSU issues with Aeros and Ojai - #5 by morganjj
ffs. This is not why I spent so much money on a psu. Thanks for providing the link
I guess there is nothing that can be done via firmware?
Since Strymon states that this appears to be an issue on their end, I’m not sure that it’s something that Singular Sound can address.