Thanks for the response.
Moved Aeros physically next to the wifi router, same issue.
Was able to load firmware onto Aeros manually via sd card and update firmware successfully.
What do we expect is the issue? I’d like to make sure it’s not hardware related or something else faulty, so I can get a new physical device if nec and/or avoid this in the future.
Are there logs you’d like me to send?
Thanks
All you need to do is get in contact with support and they will handle it from there, thanks
done, thanks
Is the .xlsx ok for 4.2.4?
I guess Yes, because you can see the 4.2.4 on the right column
That file if it’s the same one linked from here https://www.singularsound.com/pages/support looks to be the old version, will this be updated?
Do you mean the firmware link? Yes we can update this, this thread is the current thread for the official firmware.
Go back to the top to download 4.2.4 manually.
Yes, this has been updated
From the latest manual:
But based on the latest firmware,
this would need to be updated in the manual. 
Thanks
+1
Same is happening for me. Tried numerous times. Am close to router.
Ran diagnostics. Download from sigul
Cur 10338 kb/s.
Avg 5242 kb/s
The splash screen will suddenly appear after Downloading update progress bar appears and incrementalally updates for a bit. I’ve seen it get to 56% and then splash screen. Also seen it show splash screen around 30%
It fails at random % every time. I’ve tried a dozen times at least
Tried with and without sd card
FINALLY SUCCESS. Took about 20 tries.
I gave up after about 10 times failing via wifi and got it to update firmware using sd card.
Just ran wifi diagnostic too and didn’t get any error message.
Have shared a screenshot of this with support.
Seems as though this is likely related to wifi hardware on the Aeros. Wonder if we should be replacing the unit to address this…waiting to hear back from support, but any thoughts welcome.
Hi,
Is there a CC to lock a track?
I couldn’t find a command in the list.
I’d like to lock a track hands free while in the middle of a song.
Thanks
No there is not
but you can lock it to go on the mixer page of the Aeros (hold left switch)
select the track to lock
press and hold the left switch you will see “lock” and than press and hold again to lock the track
Thanks.
I know it can be done in the aeros.
But a CC is missing to do it handsfree with MM in the middle of a song IMHO.
You can only lock a track prior to starting the recording process. It would be nice to do it mid stream like last down a guitar track then create a percussive track around that which would carry on for that and other tracks.
Just noticed I should’ve posted my 4.2.4 issue in here:
Maybe the admins can move my post for I see other people suffering from the infamous ‘‘pre-count’’ even though pre-roll is set to zero…
Found a way to fix it!
Instead of sending the clock from Ableton to the Headrush and to the Aeros I’ve switched it around so that the Ableton clock goes to the Aeros and thru to the Headrush…
Turns out enabling ‘‘midi start - PLAYBACK’’ on the Aeros fixed the delay problem and really helps the Headrush to get good clock too.
Hope this can help anyone else with the same issue.
UPDATE, there is a new bug now…the recording starts at the right spot but when I’m done recording after the I hit the recording button again to initiate playback (I have it set to RPO)…the first bar of the loop is missing the first time around…BUT it is there the second time around…
Any Ideas before I go back to 3.4.2?