I agree with billvencil. The Decay function as currently implemented is not useful In fact, this does the same as the FADE function, no need to duplicate a feature with another name. Any new users coming from other units will be expecting Decay to work in continuous overdub mode. I doubt anyone will have a use for the current implementation. Hope this gets fixed soon. Until then, I will be keeping my DITTO X4 in the board, sadly.
I’m not really with you
Decay is a nice function
Can be useful to create a song:
You play a first track and the second with the decay and try a lot of sound, fx; chords etc…, to see if it’s match with the first track RATE on 100%
You can see what’s match with your song, play over a track any overdub that gonna mute the first layer as a background sound Rate on 20%
You are in live situation:
RATE on 100%, erase the track and you can play another one, and another etc…
Decay as nothing to make with fade or mute !
You are not into soundscapes, obviously.
I SIMPLY REPLY TO YOUR POST ON THE SUBJECT THAT THE DECAY AND THE FADE IS THE SAME FUNCTION.
And that’s not the same
Maybe not in soundscapes, but I know the difference between the two, it seem that you don’t
But we’re not starting a war, a forum is to help each other
Brennan, was this a response to my post? Just checking.
I think as long as it can be toggled with a midi command, it will be fine and not an impediment to work/performance flow.
1 Like
Hey there,
The Aeros does not actually create new layers at every loop length while overdubbing it just continually writes to the same file. This is an integral part to how the Aeros works and cannot be easily changed. We still will look into the possibility but cannot promise we will invest the time to change it to behave this way.
Thank you for your feedback
Yes!
Did the distorted track issue get addressed?
Hello
Is this new version still a beta?
If you follow David’s link it seems to be the case.
I thought it was a mistake, cause this is another FW version , with nothing new
just removing a function that seems not working a this moment
1 Like
Hello,
Correct, this version should be stable and we did have to remove loop decay but only for the moment, as we have a major update in the works which made it easier to fix the issues for loop decay. A fix in 4.3.0 would not have been portable so it would have been wasted time.
Thank you for your patience!
2 Likes
Version 4.3.1 is now officially out of beta and is available for download over wifi. Links for the updated manual have been added to the original post.
A newer version with LOTS of awesome new features will be coming SOON!
5 Likes
The update isn’t working for me. On the installation prompt the update is called ‘v4.30’ instead of 4.3.1. The initial stages of installation proceed normally and I am prompted to reboot. After rebooting, the % on the ‘Update progress’ screen reaches 99 then stalls for several minutes without showing 100. Then the screen blacks out for a moment and the Aeros home screen appears with a prompt to install ‘v4.30’.
I’ve tried installing three times. The Aeros is behaving normally in all other respects and I have never previously had trouble with WIFI updates. I don’t have the means to record video at present.
1 Like
I went to update and I got a red banner that said "invalid firmware, please try again’. I was just at the start of a recording session and didn’t have time to retry, but I figured I’d let you know. I have never had any probs with the OTA updates, and my Wifi is working fine. It did say 4.30, not 4.31.
Hi
With my updare the process goes fine ie downloads reboots etc.
But the actual update does not apply ie unit stays on 4.30. Asks to install new firware. Have done 4 times but stays on 4.30
Must have been a clerical error when inputting into our server, we apologize and we will fix it asap!
I believe we fixed it! Thank you for reporting! The version served should be version 4.3.1, if you already were on the beta you do not have to update 
2 Likes
Thank you.
All good.
1 Like