Aeros Firmware 5.2.x

[NYHC]

Just tested 2 times on mine (silver edition) and no problem !

[tobiaskeilmusic]

and another one: I have the MUTE function in the first spot of the stopped slide out menu, so I can ‘pre-mute’ tracks before starting the playback again. When I first open up the slide out menu the ‘mute bottom track’ option, which would be on the middle button doesn’t work. The ‘mute top track’ option always works. I suspect it has something to do with not all the menu entries having options for the middle button?

Steps to reproduce:

• load up a new 2x2 song with backing tracks in both tracks

• play / stop as often as you want

• open slide out menu with the left button

• MUTE is already selected, since its the first entry in the menu

• the middle button (mute bottom track) doesn’t work

• as soon as you walked through the menu with the wheel and come back to the MUTE function, everything works fine. It’s just on the initial slide out menu opening up, that it doesn’t work.

Sadly this is the most important time, where it needs to work…

I know I’m spamming a lot in this forum for the last 24 hours, hope that’s fine. If not, just tell me to shut up Love the AEROS so far and since I make my money playing a loop station, I’m kind of emotionally invested. I definitely appreciate the forum and the opportunities for communication VERY MUCH!! Thank you!

[tcaron20]

Are we close to an official release date for 5.2?
Looks like it’s finally for everything I need.

[Brice2nice]

Firmware 5.2.0 still seems to be in the beta state. Does anyone know when a final version will be available?

[BrennanSingularSound]

Hey all,

So far 5.2.1 is under work with some useful bug fixes, there was a recent update given on the loop decay feature:

Decay for overdubs (Loop Decay)

Hey all, Some news: There are some improvements coming to loop decay in 5.2.1, although it is not what we would say is 100% it is better than 5.2.0. We are still hopeful that we can get all the way there, but it will maybe not be included in 5.2.x Thanks for your all of your passions for this product!

We are finalizing the release and hope to have it out as soon as possible. 5.2.0 as it stands will not be going live to WiFi and will be replaced with beta 5.2.1, that being said we are very confident in the stability of 5.2.0 and encourage using it.

Thank you for your patience and questions

@padouen

Yes, all midi commands are done on the same button in the order given.
As soon as the song is ready on the aeros when I request the playback of a part (ordered on the MM) I obtain the first silent part in full before finally having my request.

Unfortunately, we could not reproduce using the information given, if you’d like to investigate this issue, please contact support@singularsound.com so they can further assist you. We are not able to reproduce on 5.2.0 or 5.1.1, the count in working as intended despite recreating the scenario

@Tony_P

Great features! Can we have some good quality videos (please not shorts) on how to access and operate these features. Thanks

We hope to have new videos soon!

Thanks for the feedback

@Bay-Blues

Works really well! It is very easy to see the currently selected menu choice now. No more bending over or trying to change my viewing angle in an effort to see what’s going on.

Well done! Thanks Singular Sound!

Excellent news

Thanks for the feedback!

@Quad

Will there be an update where we can control the left and right volumes after recording (on Mixer 1)?

We are still looking into the panning feature

Stay tuned!

@skw

Potential ‘bug’? it seems like it is now taking even longer for aeros to respond to midi song selection, and then longer to load the song once it responds.

We could not reproduce using the information given, if you’d like to investigate this issue, please contact support@singularsound.com so they can further assist you.

@bobwass

This might be a stupid question, but why 2 mixers? 1 and 2? thanks in advance ,as always.

One mixer handles the levels of the tracks in each part and the loop’s master level and the other handles the input levels, output meters, and click level control. It was advised against us by our designer to overcomplicate the screen so we did 2 pages

@tobiaskeilmusic

Found a bug / freeze, was able to reproduce it multiple times. These are the steps:

Thanks for reporting we can reproduce this bug, so we will look into it!

@tobiaskeilmusic

and another one: I have the MUTE function in the first spot of the stopped slide out menu, so I can ‘pre-mute’ tracks before starting the playback again.

We could not reproduce this in the version currently in testing, so potentially this is fixed

Thanks for reporting!

[DavidPackouz]

New version 5.2.1 has been posted in the original post!

[Steve606]

yay!

[SlimHeilpern]

@DavidPackouz

Fixed the Aeros dropping midi commands

Following 2 days of testing with 5.2.1, this does indeed appear to be fixed. Thank you!!!

• Slim

[Rhannon1]

Hey Brennan,Quick question…I am using Beta 5.2.1 for the Aeros and wanted to see if there is a way to route loops with backing tracks to the Aux Out so that I can EQ them separately from my guitar ?

thx

[Rhannon1]

If it helps…I don;t have any other tracks other than the backing track as part of a saved Backing Track Loop . so in other words I am not adding anything to the back track wav…just want it to be able to go to a different channel so I can EQ the backing track separate from the guitar.

[DanielSingularSound]

Hi Rhannon1,
It’s not possible to route different tracks inside the Aeros Loop Studio to different outputs.

[riddled]

Rhannon1 doesn’t want to route different tracks to different outputs. They just said they only use one track. They just want to route live guitar and playback to different outputs. This can be done in current non-beta firmware (5.1.1 manual p.65) and I presume in the betas as well.

[Rhannon1]

DUDE!! Thank you so much for taking the time to share this! Yes you are correct that is exactly what I was /am needing and so you have saved me a whole lot of heartache!! Thanks again brother!!!

[NigelOxide]

When I turn on the Aeros I get the message that new software is available. I downloaded and installed Firmware beta v5.2 but the software that it wants me to update to is v5.1.1. I’m assuming it’s two different things but just want to make sure before I screw something up.

[persist]

If you are happy with the beta of 5.2.1, you can safely ignore the prompt to update to 5.1.1, the last official release of the firmware.

[DavidPackouz]

Version 5.2.1 is no longer beta and is now available for download over Wifi! Download links for the updated manual have been added to the original post

[NYHC]

Good job
I’m very curious to know what will become of Bluetooth?
Any information about ?

[andremu]

Thanks for the new Update. I found a bug with the Mixer Controls. If I sent MIDI CC:20 to control the Master Fader, the currently selected fader moves too. This should only be the case with CC:27.
This worked perfectly with the last firmware, and this new behavior was started with the update.

This behavior only happens when I’m in the Mixer 1 Window. CC:20 works as expected and only changes the Master volume if the Mixer 1 window is closed. So, this is a workaround for me.

Is there a way to fix this?