Hi. I am not a midi expert, but, related to hands-free song-witching, is there a midi command that could be supported to allow the BeatBuddy next song operation to trigger the Aeros to go to the next song (also previous song) ? This would be an elegant hands free solution for Beatbuddy users.
I guess the question will then be what means “next song”…
I doubt the list of songs in your BB and Aeros are in the same order…
So you’ll probably need a MIDI message on the Aeros side with a parameter (like song number/ID) to switch to a particular song, and trigger this message from the BB when actually changing the song, but there is no such things as synchronized songs list between BB and Aeros.
Request: MIDI command to change number of count-in bars.
I alternate between 0 (live usage with band) and 2 (practicing by myself), and it’s always a pain to bend over and scroll endlessly to get to the bottom of the song settings page.
Side note: increasing the scroll sensitivity would be great too.
Request: (I made this one in another post, but i just discover this topic)
MIDI CC Messages for Recording source selection. Maybe iit could be one CC number/value for Aux-Input and another CC number/value for Main-Input.
Instead of that I suggest to completely remove count-in limits…
What if it would count-in endlessly until you start actually playing ?
Voids the need to change number of count-in bars, and as a consequence of the midi message you are requesting … while providing much more freedom…
Hey there, that is currently not possible, we have gotten requests for users to be able to send overdub/record/play commands as well as the possibility of a MIDI command that behaves similarly to the RPO button on the Aeros. The former is probably more likely than the latter to be available soon. We do plan on adding more MIDI commands in an update soon.
Hello MIdi and Aeros masters! I’m struggling getting my Aeros to respond to my midi controller in, what I perceive, is a simple thing. I’m working in 2x2 mode. I need to hit a single button which will start a different song part at the end of a loop AND record a second track THEN hit another single button and have the Aeros jump back to the first loop and start recording a new track as soon as that song part starts. It seems it’s some combination of the CC113 (begin transition to next part) and CC41 (record new track) however it won’t shift into automatic recording when switching between parts. I don’t want to use CC102 (immediate song part change). At present I can do it with the buttons on the Aeros obviously, but I want a single button push. Got any guidance? Thanks
First of all congratulations for all the work from Singular Sound for improve our machine with new functions so often
+1 to implement MIDI CC commands to control REC, OVERDUB, PLAY.
Of course like with CC-37 UNDO, with possibility to send command REC track 4 or OVERDUB track 3…
I think that for someone like me that is trying to be able to control some devices with only a midi pedalboard it is basic feature, otherwise you must have midi Aeros next to midi pedalboard.
Is not possible to lay Aeros on the table for example.
Thanks for you input. Brennen, the suggestion about controllers CC102 followed by CC41 works well, however, the change happens immediately. I’d like to have the aeros follow the “end of loop” idea in 2x2 mode with a single tap. I’ve tried to use CC113 (change part) and CC41 with two different buttons on my controller set up individually for part 1 or 2 but it doesn’t work switch appropriately. Suggestions? And thanks in advance.
Hey Brennen, I have to amend my statement. Turns out that the controller combination CC102 and CC41 are not overly dependable. The combo will always switch to a new part and start recording a new track with the initial switch, however, hitting the combo a second time only seems to switch to the other part and doesn’t alway start recording the track. Weirdness.
hi
what is the midi command to clear recording as you can do when you keep pressing the stop switch on the aeros ? and what is the midi command to confirm yes to it ?
i would like to send that from my iPad
thanks
Odd, maybe you could use a toggle to make it so you hit the same button twice, not as great as a single tap but it is a workable option. This would be best in 2x2, like so: