The update process should only take a couple of minutes at the most.
- Power the pedal down.
- Remove the SD card.
- Wait a couple of minutes.
- With the power off on the pedal, insert the card.
- Power the pedal up.
- Does the pedal power up? If so, check the pedal Settings > About to verify that your firmware has updated to 3.8.0
- If not, follow the instructions at Pedal does not power on
If you still can’t get the pedal to power up or complete the firmware update, contact Support, support@singularsound.com
Let us know what you had to do to get it working again.