I recently picked up my beatbuddy and absolutely love it. I had no idea how much it could really do and after logging into the Singular sound website i was kind of blown away. Following the video tutorials I dl the new firmware, followed the video, copies the files onto the card, inserted back into the beatbuddy and 3 hours later it is still telling me it is updating beatbuddy firmware. Can someone give me advice on what I should do now? I know you aren’t supposed to shut the unit down while the firmware is loading. Thanks in advance.
- Unplug the power from the pedal. It usually takes under a minute for a firmware update.
- Leave the pedal disconnected from the power for ten minutes.
- Remove the SD card.
- After ten minutes, insert SD card & plug it back in
- If it powers up, check the firmware version.
- If it didn’t update, download and unzip the firmware again.
- Put your SD card in your computer slot reader, delete all contents from the card and drag all the firmware files to the card.
- With power off on the pedal, insert SD card and power up allowing the update to complete
-
If the pedal does not power up, follow the instructions at Pedal does not power on
-
If you’re still having issues, best to contact support@singularsound.com
Please let us know how you get it working.
Thanks for your help…looks like it updated properly.